YANMAR CHP MODELS

CP5WN Combined Heat and Power by YANMAR

CP5WN CHP

CP10WN CHP Systems by YANMAR

CP10WN CHP

CP35d1 CHP Systems by YANMAR

CP35D1 CHP

COOLING CAPACITY8 Ton
HEATING CAPACITY106,000 BTU
LOW TEMP/COLD TEMP HEATING106,000 BTU
NUMBER OF PIPES2 (Heat or Cool)

RATED OUTPUT10 kW
VOLTAGE, FREQUENCY240V, 60Hz
RATED RECOVERED HEAT57,300 BTU/h (natural gas);
65,200 BTU/h (propane)
RATED HOT WATER TEMP OUTLET158 F (70 C)
NET WEIGHT1,653 lb
(750 kg)

RATED OUTPUT35 kW
VOLTAGE, FREQUENCY208V, 60Hz
RATED RECOVERED HEAT204,040 BTU/h
RATED HOT WATER TEMP OUTLET176 F (80 C)
NET WEIGHT3,153 lb
(1,430 kg)

HOW DOES CHP WORK?

YANMAR’s Combined Heat and Power system uses an internal combustion engine, powered by clean natural gas or propane, to produce both heat and electric power. The unit efficiently utilizes up to 88% of the fuel burn versus 33% burn rate of conventional, from-the-grid sources.

CHP applications involve the recovery of wasted engine heat to produce useful thermal energy and electricity. To do this, natural gas or propane fuel is combusted in a YANMAR engine to generate electricity, and the heat that is normally lost in the engine’s exhaust system is recovered to provide heat for hot water (example: laundry or dish washing) or for space heating, cooling and dehumidification.CHP can be used in almost every state, and is mainly found in areas with high concentrations of commercial activity, high electricity prices and energy policies that favor Combined Heat and Power.

CHP is ideally suited for facilities that have a high demand for heat (a high thermal load) in areas where electricity costs more than $0.10 per kilowatt-hour.

Functional

With YANMAR CHP’s blackout start option, you can ensure your heat and electricity remain uninterrupted even during a blackout. High efficiency inverters convert YANMAR CHP’s generated electrical output into DC voltage and frequency with built-in protection and a synchronization device required for grid interconnections.

Cost Efficient

As electric prices continue to increase, you can benefit from significant utility bill cost savings by switching to abundant natural gas or propane.

Gives you options

By using a YANMAR CHP system as your primary power source, you are no longer solely reliant on the grid for your company’s viability or personal comfort. You now have the option to have power when the grid fails or in remote areas not currently served.

Environmentally Friendly

By using energy efficiently, your carbon footprint can be reduced by as much as 50% over conventional means. According to U.S. EPA CHP Partnership calculations, a YANMAR 10kW CHP heat and power system can reduce enough greenhouse gases to offset the carbon footprint of seven cars on U.S. roads.

Quiet

YANMAR CHP Units are reliably quiet.

  • 54dB(A) CP5WN
  • 56dB(A) CP10WN
  • 64dB(A) CP35D1

Easy to Install

YANMAR’s comprehensive technical training curriculum develops certified technicians prepared in all phases of design, installation, commissioning and service.

Energy Efficient

By utilizing a highly efficient engine and capturing nearly all of the remaining energy as heat, the heat and power producing YANMAR CHP system can be up to 2.6 times as efficient as your current centralized power.

CHP ACCESSORIES

  • All
  • Anti-Vibration Mount
  • CHP Accessories
  • Control
  • Duct
  • Meters
  • Miscellaneous
  • Transformers

Control Accessories

Transducers for CP5/CP10 Models XL5C1-1/2A4-1-RS. Grid-Tied Inverter SMA Windy Boy 5000 Required SMA Grid-Tied Inverter WB500. Grid-Tied Inverter SMA Sunny Boy 5000US Required SMA Grid-Tied Inverter SB5000US. Off-Grid Inverter SMA Sunny Island 4548SMA Required for Blackout Start models. System Controller Neutralizer DFB19E Neutralizer DFB19E Optional Neutralizer Model DFB19E. Multicluster MLB-12U Box

Duct Accessories

Exhaust Pipe Extension Joint 10kW and 35kw Optional Exhaust Pipe Extension Joint 10 kW Model EKC10W. The Exhaust Pipe Extension Joint is used to extend the flue pipe easily and correctly. This accessory is required for indoor installations and outdoor installations if the exhaust gas needs to be led to a specific location. Exhaust Pipe Extension Joint 5kW Optional Exhaust ...

Transformers

Current Transformer 600A Optional Current Transformer 600A Model CT600/5A. Current Transformer 400A Optional Current Transformer 400A Model CT400/5A. Current Transformer 200A Optional Current Transformer 200A Model CT200/5A. Transformer for CP35D1Z Required Transformer for CP35D1Z (Blackout Start).

Anti-Vibration Mounts

Anti-Vibration Mount 5kW, 10 kW and 35 kW Optional Anti-Vibration Mounts The Anti-Vibration mount is used to prevent vibration from the CHP from reaching the building, and to reduce the noise level cause by vibration. Installation is necessary when the unit is installed on a roof, indoors in an area with rooms/floors underneath or in certain basements.

Miscellaneous

Anti-Salt Paint Required if within a 1/2 mile of salt water. Anti-Salt Paint Model R. AC/DC Power Cord Required AC/DC power cord for Remote Monitoring Adaptor Model ACDC24. Heater Kit 5kW and 10 kW Required if in a cold area below 40 degrees Fahrenheit. Heater Kit 5 kW Model HHC4W. The Heater Kit is used in cold areas to warm ...

Meters